🎉 Pre-Black Friday Sale! Get 3% OFF Orders Over $2,000 | Shop Now & Save More! 🎉

10 Things Every Homeowner Should Know About Their Air Conditioner

Brian Schaeffer |

For most homes in the South, central air isn't a luxury. It's one of the most expensive things in the house to buy and to run. Still, most homeowners only think about it when it stops working.

This guide covers the ten things we wish every customer knew before they called us. Knowing them will help you keep your system running longer, lower your power bill and make a smarter choice when it's time to replace it.

1. Your AC moves heat. It doesn't make cold

An air conditioner works by taking heat out of your home and dumping it outside. Inside, a fan blows warm room air across the evaporator coil. Refrigerant in that coil absorbs the heat and turns from a liquid into a gas, the same way sweat cools your skin as it evaporates.

The refrigerant then travels to the outdoor unit. There the compressor pressurizes it, and the condenser coil releases the heat into the outside air as the refrigerant turns back into a liquid. Then the cycle repeats.

Because refrigerant changing state moves so much heat, a healthy system delivers about three units of cooling for every unit of electricity the compressor uses.

Learn more: Types of Air Conditioning Systems: How Each One Works · What Is an AC Condenser Unit and How Does It Work? · How HVAC Supply and Return Works

2. What a "ton" of cooling means

The term comes from the days of ice-block cooling. Early cooling machines were rated by how much ice they could replace in a day. Today, one ton equals 12,000 BTU per hour of cooling.

As a rough guide:

  • Window units: usually under 1 ton
  • Smaller homes: often 1.5–2.5 tons
  • Larger homes: up to 5 tons, the top of the residential range

Bigger isn't better. An oversized system cools the house quickly and shuts off before it has removed much humidity, so the house ends up cool but clammy. It also turns on and off more often, which wears it out faster. Proper sizing is based on your home's square footage, insulation, windows and climate, not on what the old unit was.

Learn more: How to Calculate HVAC Tonnage Based on Square Footage · HVAC Sizing Guide

3. Why AC systems lose performance

An air conditioner is built around three things staying in balance: the cooling load of the house, the correct amount of refrigerant (the "charge"), and the right airflow across both coils. When one of these changes, performance drops.

  • More heat inside the house (an addition, more people, new appliances) can be more than the system was sized for.
  • A refrigerant leak reduces capacity. The system runs longer and still can't keep up on the hottest days.
  • A blocked outdoor coil (leaves, grass clippings, a fence or shrubs too close) makes it harder to release heat, especially in peak summer.
  • Too little indoor airflow from a dirty filter, closed vents or a failing blower can make the evaporator coil freeze. A frozen coil cools poorly and can eventually damage the compressor, which is the most expensive part to replace.

Warning signs: warm air from the vents, ice on the refrigerant lines, a system that runs nonstop, or a sudden jump in your power bill. Call a technician before a small problem becomes a compressor replacement.

4. Your air filter does more than you think

The filter sits in the return grille or in a slot near the air handler. It protects the indoor coil and blower from dust, and it cleans the air you breathe.

As a filter collects dust it actually catches more, but it also restricts airflow. That's when it needs replacing. How often depends on the filter's size, pets, construction dust and how much the system runs. Check it monthly in summer.

Two common mistakes:

  • Leaving a dirty filter in. Airflow drops, the system works harder and the clogged filter can start releasing what it has trapped.
  • Running with no filter. Airflow improves, but dust builds up on the evaporator coil instead. Cleaning or replacing a coil costs far more than filters do.

ASHRAE's consumer guidance recommends a filter rated MERV 6 or higher. Before going much higher, make sure your blower can handle the extra resistance.

Learn more: How Do HVAC Filters Work? · Where Is My Filter Located and What Size Is It?

5. Maintenance: what you can do and what needs a pro

You can do these:

  • Check and change the filter regularly.
  • Keep 2 feet of clear space around the outdoor unit, and clear away leaves and debris.
  • Gently rinse the outdoor coil with a garden hose at the start of the season, with the power off. Don't use a pressure washer.
  • Make sure the condensate drain line isn't clogged and water drains freely.

Call a technician for these:

  • Checking the refrigerant charge and fixing leaks
  • Cleaning the indoor evaporator coil
  • Electrical checks on the capacitor, contactor and wiring
  • Measuring airflow and the temperature drop across the coil

A professional tune-up once a year, ideally in spring before the heat arrives, catches most problems while they're still cheap to fix.

6. Leaky ducts can waste a huge share of your cooling

This is the most overlooked problem in home cooling. When ducts run through an attic, crawlspace or garage, any leak blows cooled air into a space you're not trying to cool. ASHRAE estimates duct leakage can waste 20–40% of the energy of an otherwise healthy system.

Signs your ducts may be leaking:

  • Some rooms are always warmer than others.
  • The attic or crawlspace feels cool in summer.
  • Your system seems undersized even though it was sized correctly.

The fix: seal joints and seams with duct mastic, a thick paste brushed onto the joints, or with UL-rated foil tape. Don't use ordinary cloth duct tape, which dries out and fails. Ducts outside the conditioned space should also be insulated. Handy homeowners can seal ducts they can reach. For hard-to-reach runs, hire a contractor. Sealing leaky ducts can recover as much as half a ton of cooling without buying new equipment.

Learn more: Understanding HVAC Flex Duct · How HVAC Dampers Help Control Airflow

7. How to get more efficiency from the system you have, and the next one

With your current system: seal the ducts, keep filters clean, keep the coils clean, and have a technician confirm the refrigerant charge and airflow are right.

When you replace it, compare efficiency ratings:

  • SEER2 measures efficiency over a whole cooling season, and higher is better. Federal minimums vary by region. In the Southeast, including Georgia and Florida, split-system air conditioners under 45,000 BTU must be at least 14.3 SEER2, and larger systems at least 13.8 SEER2. In the North the minimum is 13.4 SEER2, and split-system heat pumps must be at least 14.3 SEER2 everywhere.
  • EER2 measures efficiency at peak heat. It matters most in hot, dry climates like the Southwest.
  • Dehumidification performance matters most in hot, humid climates. Variable-speed and two-stage systems usually handle humidity much better than single-stage units.

Going above the minimum often pays for itself in lower bills, especially if your system runs much of the year.

Learn more: What Is SEER Rating? · Understanding SEER2 Ratings · Top 10 Easy DIY Ways to Improve Your AC Efficiency

8. Reduce the load, and your AC works less

The cheapest cooling is the cooling your house never needs. There are two ways to reduce the load.

Improve the house itself:

  • Add attic insulation and seal air leaks around doors, windows and attic hatches.
  • Shade west- and south-facing windows with blinds, awnings or trees.
  • When you replace the roof or windows, choose reflective "cool" roofing and low-E windows. These upgrades cost little extra at that point.

Cut the heat you make indoors:

  • Turn off lights, electronics and equipment you're not using.
  • Run the dryer, dishwasher and oven in the cooler morning or evening hours.
  • Use kitchen and bath exhaust fans to send heat and steam outside.
  • Choose ENERGY STAR appliances when you replace them.

In dry climates, evaporative coolers and bringing in cool night air can also take a big share of the load off the AC.

9. Your home needs fresh air too

Cooling is only part of the job. A good system also keeps indoor air fresh. Without enough ventilation, odors, moisture and pollutants from cooking, cleaning products and building materials build up indoors.

ASHRAE's guidance for homes is roughly enough ventilation to replace the indoor air about once every four hours, depending on the home.

  • Older homes usually get this, and often more, through leaks in walls and ducts. That works, but it wastes energy.
  • Newer, tightly built homes often need mechanical ventilation, such as an ERV (energy recovery ventilator), a fresh-air damper or a supply ventilation system, to stay healthy.

Learn more: What Is a Fresh Air Damper? · What Is an Economizer in HVAC?

10. Humidity matters as much as temperature

The first air conditioners were invented to control humidity, not heat. In humid climates like ours, high indoor humidity makes a home feel sticky at any temperature, and it can lead to mold, musty odors and damage to wood floors and furniture.

Your AC removes moisture as it cools (that's the water in the drain line), but only as a side effect. A standard system can't control temperature and humidity separately. Mild, damp spring and fall days are often the worst, because the house is warm enough to feel muggy but not hot enough for the AC to run long enough to dry the air.

ASHRAE suggests keeping indoor humidity at or below about 60% relative humidity at 78°F. To help your system keep humidity down:

  • Set the thermostat fan to "Auto," not "On." When the fan runs constantly, it blows water off the wet coil back into your house before it can drain away.
  • Use exhaust fans while cooking and showering, and vent your dryer outside.
  • Keep windows closed on humid days.
  • Choose the right size system. An oversized unit runs in short bursts and never removes enough moisture.
  • If humidity is still high, look at a variable-speed system with enhanced dehumidification, or add a whole-house dehumidifier.

The bottom line

Understand how your system works, keep the airflow and filters clean, seal your ducts, and watch your humidity. Do those things and your AC will last longer, cost less to run and keep you more comfortable.

When it's time to replace your system, our team can help you choose the right size and efficiency for your home. Start with our guide to the types of air conditioning systems, browse our Goodman, Daikin, Trane, Amana, Mitsubishi and MrCool systems at ACUnitsForLess.com, or call 678-535-7176 to talk with an HVAC specialist. We ship to all 48 contiguous states.

Source: ASHRAE consumer guidance on home air conditioning; U.S. Department of Energy regional efficiency standards.

cold-air-warm-savings-desktop