Discounts Available | Add to Cart for your Savings | La Habla Español | Authorized Dealer
Trane 25 TON PACKAGE AC, 460 Volts 3 Phase, TSJ300A4S000000 is backordered and will ship as soon as it is back in stock.
We provide Free Shipping
Email us at : sales@acunitsforless.com
Call us at : 678-672-0213
Physical Address : Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia 30142, United States
Trane 25 TON PACKAGE AC, 460 Volts 3 Phase, TSJ300A4S000000
- Packaged rooftop units cooling, heating capacities, and efficiencies are AHRI Certified within scope of AHRI Standard 210-240 for 6 to 25 Tons and ANSIZ21.47 and 10 CFR Part 431 pertaining to Commercial Warm Air Furnaces (all gas heating units).
- Convertible airflow.
- Symbio controls operating range is from 0-125.0 F from factory; if designing for cooling mode operation below 40.0 F ambient temp, add low ambient kit to assure continuous and reliable operation.
- Factory assembled, internally wired, fully charged with R-410A, and 100 percent run tested to check cooling operation, fan and blower rotation, and control sequence before leaving the factory.
- Colored and numbered wiring internal to the unit for simplified identification.
- Units cULus listed and labeled, classified in accordance for Central Cooling Air Conditioners.
Casing
- Zinc coated, heavy gauge, galvanized steel.
- Weather resistant pre-painted metal with galvanized substrate.
- Meets ASTM B117, 672 hour salt spray test.
- Removable single side maintenance access panels.
- Lifting handles in maintenance access panels (can be removed and reinstalled by removing fasteners while providing a water and air tight seal).
- Exposed vertical panels and top covers in the indoor air section insulated with a cleanable foil-faced, fire-retardant permanent, odorless glass fiber material.
- Base pan shall have no penetrations within the perimeter of the curb other than the raised 1 inch high downflow supply/return openings to provide an added water integrity precaution, if the condensate drain backs up.
- Base of the unit insulated with 1/8 inch, foil-faced, closed-cell insulation. - Unit base provisions for forklift and/or crane lifting on three sides of unit.
Hail Guards
- Provides condenser coil protection.
Microchannel Coils
- Optimal heat transfer performance due to flat, streamlined tubes with small ports, and metallurgical tube-to-fin bond.
- Reduce system refrigerant charge by up to 50% leading to better compressor reliability. - Compact all-aluminum microchannel coils reduce the unit weight.
- Recyclable all aluminum coils All aluminium construction minimizes galvanic corrosion. - Strong aluminum brazed structure provides better fin protection.
- Flat streamlined tubes more dust resistant and easy to clean.
- Coils leak tested at the factory to ensure the pressure integrity.
Compressors
- All units have direct-drive, hermetic, scroll type compressors with centrifugal type oil pumps.
- Suction gas-cooled motor with voltage utilization range of plus or minus 10 percent of unit nameplate
voltage.
- Internal overloads standard with scroll compressors.
- All units have dual compressors.
-Three stages of cooling available on 6 to 17.5 tons units and four stages of cooling available on 20 and 25 tons units.
Filters
-Two inch standard filters shall be factory supplied on all units.
Frostat
- Utilized as a safety device.
- Opens to prevent freezing temperatures on evaporator coil.
- Temperature will need to rise to 50°F before closing.
- Utilized in low airflow or high outside air applications (cooling only).
2024/09/27 11:21:30
Indoor Fan
- Direct drive plenum fan design - 6 to 25 tons units.
- Plenum fan design - backward-curved fan wheel along with an external rotor direct drive variable speed indoor motor.
- Supply fan speed adjustments can be made using the Symbio 700 or Mobile App. - Motors are thermally protected.
- Variable speed direct drive motors are high efficiency - 6 to 25 tons.
Economizer (Standard)
- Available with or without barometric relief.
- Fully modulating 0-100 percent motor and dampers, minimum position setting, preset linkage, wiring harness with plug, spring return actuator and fixed dry bulb control.
- Barometric relief shall provide a pressure operated damper that shall be gravity closing.
- Barometric relief shall prohibit entrance of outside air during the equipment ?off? cycle.
- Optional solid state or differential enthalpy control.
- Arrives in shipping position and shall be moved to the operating position by the installing contractor.
Heatpump - Economizer (Standard)
- Available with or without barometric relief.
- Fully modulating 0-100 percent motor and dampers, minimum position setting, preset linkage, wiring harness with plug, spring return actuator and fixed dry bulb control.
- Barometric relief shall provide a pressure operated damper that shall be gravity closing.
- Barometric relief shall prohibit entrance of outside air during the equipment ?off? cycle.
- Optional solid state or differential enthalpy control.
- Arrives in shipping position and shall be moved to the operating position by the installing contractor.
We provide Free Delivery . Please contact us for assistance.
Once you place an order on ACunitsforless.com, we will promptly reach out to express our gratitude for your purchase and address any inquiries you may have. Our team will also review your order with you to ensure that you have selected the right equipment for your specific needs.
Orders will be processed within 48 hours of payment confirmation.
Upon shipping your order, you will receive an email notification containing a tracking number, which allows you to monitor its progress. Please allow 48 hours for the tracking information to become available.
If your order is placed and payment is received by 12 p.m. EST (Monday - Friday), the order typically ships within the next 72 hours. Orders submitted on weekends are processed on Mondays. We kindly request that you allow 3-5 business days for your shipment to arrive, although, in most cases, it arrives sooner.
To ensure smooth communication, customers are advised to confirm that the contact information provided in their order is valid and in working condition. We will use the information on the order page to make phone calls and send emails.
After an order ships, the shipping carrier will contact customers to coordinate the delivery schedule.
Once an order has been processed and shipped, it's important to note that the shipping address cannot be altered. Items designated for pickup at the terminal will only be released to the individual listed on the shipping label. A valid driver's license and a signature will be required for the release of the shipment. We adhere strictly to this policy, with no exceptions.
Damages and Shipping Issues:
At ACUnitsForLess.com, we are committed to providing our customers with a superior buying experience. We offer free crating to safeguard your equipment during transit, thus eliminating any concerns regarding damage. When you compare our shipping policy to that of our competitors, you'll notice the difference. Customers are not held accountable for any damage to their orders.
Please make your purchase with confidence, knowing that we will ensure you receive the correct equipment, brand new and in perfect condition.
Cancellation: If an order is canceled or a delivery is refused after the order is in transit, it will be considered a "Return Request" and subject to the fees outlined in our Return Policy.
We kindly ask that you refrain from scheduling the installation of your equipment until you have received and thoroughly inspected it. ACUnitsForLess.com cannot be held responsible for any costs associated with pre-scheduled appointments that are missed due to shipping delays or damages.
Please contact us with any questions:
sales@acunitsforless.com
678-535-7176
If you are not entirely happy with your purchase, you can return your item/s within 60 days of delivery for a full refund of the original payment.
Once we have received the product(s) and, if appropriate, any packaging, a refund will be credited to the payment card account within two weeks; please note that it may take up to 3 days for your bank to credit your account. We are not liable and cannot take responsibility for any bank charges you may incur during the refund process.
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. In this case, we will cover the cost of return shipping as well as we will not charge any restocking fee.
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item. The cost of return shipping is the responsibility of the customer if you want to Exchange. Also we will charge 10% restocking fee.
Your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging to be eligible for a return. You’ll also need the receipt or proof of purchase.
The following items are not eligible for return:
We will refund the full order amount minus the return shipping cost and a 10% restocking fee.
We charge 10% Restocking Fee, except product got damaged by carrier.
To start a return, you can contact us at sales@acunitsforless.com. If your return is accepted, we’ll send you a return shipping label and instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
If you need any help, feel free to contact us
Address : Unit 1284, 2210 Holly Springs Parkway, Holly Springs, Georgia, 30142, United States
E-Mail: sales@acunitsforless.com
Phone: +1 678-535-7176
Customer Service: Monday to Friday between 9:00 am to 5:00 pm.
We provide a 60-day return policy for your convenience. To initiate a return, it is essential that the items remain unused and in their original manufacturer's packaging. When returning the equipment, please ensure that you reuse all shipping materials that were initially used to protect the equipment during shipment.
We will provide the return label.
Upon receiving your return, we will issue a refund for the full order amount, minus the return shipping cost and a 10% restocking fee.
We are not liable for any injuries, damages, or losses resulting from improper service or installation of our products. While we strive to provide reliable and high-quality HVAC products, any issues arising from improper handling, installation, or maintenance are the sole responsibility of the installer or service provider. Customers are encouraged to engage qualified professionals for installation and servicing to ensure safety and optimal performance. By purchasing and using our products, customers agree to hold The Acunitsforless Company harmless from any liability related to improper service or installation. It is essential to follow all manufacturer guidelines, industry standards, and local building codes to mitigate risks and ensure safe operation.
Please note that all installations should be performed by a licensed and experienced HVAC professional. Improper installation may result in equipment malfunction, reduced performance, increased energy consumption, and potential safety hazards.
Furthermore, it is essential to understand that any installation not conducted by a qualified HVAC professional may result in the voiding of warranty coverage. Manufacturers typically require installations to be carried out by certified technicians to uphold warranty terms and conditions.
By choosing to have your HVAC systems installed by a qualified professional, you not only protect your investment but also ensure the optimal performance and safety of your heating, ventilation, and air conditioning systems while maintaining warranty coverage.
In compliance with California's Proposition 65, we are obligated to inform you that some products sold on our website may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
While we prioritize the safety and quality of our products, certain components or materials used in manufacturing may contain trace amounts of chemicals listed under Proposition 65. These chemicals may be present in various forms, including but not limited to coatings, adhesives, plastics, and metals.
It's important to note that the presence of these chemicals does not necessarily indicate any risk of harm when the products are used as intended. However, we encourage you to take all necessary precautions when handling or using our products, especially in accordance with any warnings or instructions provided.
For more information about Proposition 65 and the list of chemicals included, please visit the official website here.
Yes, Revolv, Intertherm, and Miller are brands that are part of the Nortek Global HVAC family, which produces heating and cooling products specifically designed for manufactured and mobile homes. These...
Brian Schaeffer |
Explore the differences between Carrier, Daikin, and Trane HVAC systems. Compare their efficiency, reliability, features, and pricing to choose the best brand for your heating and cooling needs.
Brian Schaeffer |
Learn why contractors prefer installing Goodman R32 HVAC systems. Discover the benefits of this efficient, quiet, and easy-to-install system compared to R410A.
Brian Schaeffer |
Confused about the differences between R32 and R410A refrigerant jugs? This guide explains everything you need to know, including the left-handed threading on R32 jugs and the importance of using...
Brian Schaeffer |
Understanding the role of HVAC supply and return systems is crucial for maintaining efficient airflow and a comfortable indoor environment. This guide explains how supply vents distribute conditioned air throughout...
Brian Schaeffer |
HVAC filters might seem like a minor component of your heating and cooling system, but their role in maintaining indoor air quality and system efficiency is critical. Understanding how they...
Brian Schaeffer |
Wondering where HVAC dampers are located? This guide explains how to locate HVAC dampers, whether manual or automatic, and highlights their importance in controlling airflow, optimizing temperature, and improving energy...
Brian Schaeffer |
Wondering where your HVAC filter is located and what size you need? This guide walks you through common locations for filters in your home, including furnaces, air handlers, and return...
Brian Schaeffer |
Choosing between MrCool DIY Mini Splits, Daikin Mini Splits, and Mitsubishi Mini Splits can be challenging, but each brand offers distinct advantages. MrCool stands out for its DIY installation and...
Brian Schaeffer |
Discover why ACUnitsForLess.com sells the innovative MrCool U-Shaped Window Units and how they outperform traditional window ACs. With their unique design, these units offer quieter operation, enhanced energy efficiency, and...
Brian Schaeffer |
Precedent® Rooftop Units - These units are designed for light commercial use and offer capacities ranging from 3 to 25 tons. They are available in gas/electric, electric/electric, heat pumps, and...
Brian Schaeffer |
Your HVAC system’s thermostat is key to maintaining a comfortable home environment. In this guide, we explore how to recognize signs of a faulty thermostat, common issues that can arise,...
Brian Schaeffer |
- Packaged rooftop units cooling, heating capacities, and efficiencies are AHRI Certified within scope of AHRI Standard 210-240 for 6 to 25 Tons and ANSIZ21.47 and 10 CFR Part 431 pertaining to Commercial Warm Air Furnaces (all gas heating units).
- Convertible airflow.
- Symbio controls operating range is from 0-125.0 F from factory; if designing for cooling mode operation below 40.0 F ambient temp, add low ambient kit to assure continuous and reliable operation.
- Factory assembled, internally wired, fully charged with R-410A, and 100 percent run tested to check cooling operation, fan and blower rotation, and control sequence before leaving the factory.
- Colored and numbered wiring internal to the unit for simplified identification.
- Units cULus listed and labeled, classified in accordance for Central Cooling Air Conditioners.
Casing
- Zinc coated, heavy gauge, galvanized steel.
- Weather resistant pre-painted metal with galvanized substrate.
- Meets ASTM B117, 672 hour salt spray test.
- Removable single side maintenance access panels.
- Lifting handles in maintenance access panels (can be removed and reinstalled by removing fasteners while providing a water and air tight seal).
- Exposed vertical panels and top covers in the indoor air section insulated with a cleanable foil-faced, fire-retardant permanent, odorless glass fiber material.
- Base pan shall have no penetrations within the perimeter of the curb other than the raised 1 inch high downflow supply/return openings to provide an added water integrity precaution, if the condensate drain backs up.
- Base of the unit insulated with 1/8 inch, foil-faced, closed-cell insulation. - Unit base provisions for forklift and/or crane lifting on three sides of unit.
Hail Guards
- Provides condenser coil protection.
Microchannel Coils
- Optimal heat transfer performance due to flat, streamlined tubes with small ports, and metallurgical tube-to-fin bond.
- Reduce system refrigerant charge by up to 50% leading to better compressor reliability. - Compact all-aluminum microchannel coils reduce the unit weight.
- Recyclable all aluminum coils All aluminium construction minimizes galvanic corrosion. - Strong aluminum brazed structure provides better fin protection.
- Flat streamlined tubes more dust resistant and easy to clean.
- Coils leak tested at the factory to ensure the pressure integrity.
Compressors
- All units have direct-drive, hermetic, scroll type compressors with centrifugal type oil pumps.
- Suction gas-cooled motor with voltage utilization range of plus or minus 10 percent of unit nameplate
voltage.
- Internal overloads standard with scroll compressors.
- All units have dual compressors.
-Three stages of cooling available on 6 to 17.5 tons units and four stages of cooling available on 20 and 25 tons units.
Filters
-Two inch standard filters shall be factory supplied on all units.
Frostat
- Utilized as a safety device.
- Opens to prevent freezing temperatures on evaporator coil.
- Temperature will need to rise to 50°F before closing.
- Utilized in low airflow or high outside air applications (cooling only).
2024/09/27 11:21:30
Indoor Fan
- Direct drive plenum fan design - 6 to 25 tons units.
- Plenum fan design - backward-curved fan wheel along with an external rotor direct drive variable speed indoor motor.
- Supply fan speed adjustments can be made using the Symbio 700 or Mobile App. - Motors are thermally protected.
- Variable speed direct drive motors are high efficiency - 6 to 25 tons.
Economizer (Standard)
- Available with or without barometric relief.
- Fully modulating 0-100 percent motor and dampers, minimum position setting, preset linkage, wiring harness with plug, spring return actuator and fixed dry bulb control.
- Barometric relief shall provide a pressure operated damper that shall be gravity closing.
- Barometric relief shall prohibit entrance of outside air during the equipment ?off? cycle.
- Optional solid state or differential enthalpy control.
- Arrives in shipping position and shall be moved to the operating position by the installing contractor.
Heatpump - Economizer (Standard)
- Available with or without barometric relief.
- Fully modulating 0-100 percent motor and dampers, minimum position setting, preset linkage, wiring harness with plug, spring return actuator and fixed dry bulb control.
- Barometric relief shall provide a pressure operated damper that shall be gravity closing.
- Barometric relief shall prohibit entrance of outside air during the equipment ?off? cycle.
- Optional solid state or differential enthalpy control.
- Arrives in shipping position and shall be moved to the operating position by the installing contractor.